Name: Motorized Micromanipulator
SKU: MM-500
Availability: InStock

Motorized Micromanipulator

( 0 out of 5 )

0,00 €

The MM-500 micromanipulator is designed to meet a wide variety of needs of the scientific community and is suitable for patch clamp experiments, microinjection, extracellular and intra-cellular recording, and precision robotic positioning applications: in general for all those tasks where precision in probe and micropipette handling is critical.

SKU: MM-500

Categories: Neuroscience, Zebrafish

Description

The MM-500 Motorized Micromanipulator offers several operating modes, including: continuous/step-by-step mode, general/diagonal mode, coarse/fine adjustment, etc. It allows you to place different types of probes, pipettes, etc. (with maximum weight of 500 g) with great precision and ease. Here are the main features:

Minimizing drift to ensure constancy and stability during long-duration experiments
The ability to maneuver with different modes enables easy use in a wide variety of applications (continuous, step, etc.).
The speed of axis movement is adjustable, as is the tilt (via software) for diagonal movement
With the two buttons WORK and ORIGIN, you can quickly move the micromanipulator between these two (customizable) positions to speed up and make the process more efficient

Codes & Accessories

MT-75/MT-150: support column
MT-500 (Microscope moving Platform): contains 3 support columns, 1 moving platform on XY plane, 1 mounting bracket for microscope, 1 mounting bracket for moving platform
MT-800: contains 1 moving platform on XY plane, 1 microscope mounting bracket, 1 microscope mounting bracket
MM-500-2: complete system of 2 micromanipulators (left and right) and related setup
MM-500-L: complete system of 1 micromanipulator (left) and related setup
MM-500-R: system complete with 1 micromanipulator (right) and related setup
MM-500L: 1 micromanipulator (left) – mechanical unit only
MM-500R: 1 micromanipulator (right) – mechanical unit only

Technical specifications.

Maximum speed: 2.9mm/s
Drift in the long run: 10nm/h (room temp 24℃)
Resolution: 0.132μm/0.033μm
Excursion: 25mm on all axes
Repeatability of placements: ≤1μm (in the single axis), ≤2μm (in the case of interpolation of all 3 axes)
Controller size and weight: 20.4 x 17 x 14 cm (LxWxH) – 1.8Kg
Micromanipulator size and weight: 14 x 14.8 x 14.8 cm (LxWxH) – 1.6Kg
Size and weight of hand controller: 15.3 x 12.3 x 8.7 cm (LxWxH) – 1.1Kg